Join the F2 Labs Team
About F2 Labs: F2 Labs is a full-service accredited regulatory testing laboratory with more than 25 years of experience performing EMC and Safety evaluations on an extensive range of products. Our facilities are ISO/IEC 17025 accredited by the American Association of Laboratory Accreditation (A2LA), which is an ILAC signatory. Our reports are accepted worldwide by certification organizations including various Notified Bodies, OSHA accredited NRTLs, and more.
Click on the job title below to navigate to more information about our current available positions:
| EMC Technical Manager | Senior EMC Engineer | EMC Engineer |
|---|---|---|
| Product Safety Engineer | Senior Compliance Engineer – Product Safety | Senior Safety Engineer |
Employee Reviews
Our present and former employees have a lot to say about working at F2 Labs.
Previous
Next
EMC Technical Manager
Middlefield, OH
F2 Labs is seeking an EMC Technical Manager to join our EMC testing team in Middlefield, OH!
Responsibilities: EMC Technical Managers’ responsibilities include, but are not limited to:
- Ensuring Competence and adequate supervision of Laboratory and field-testing activity and EMC engineering staff.
- Maintaining and updating ongoing EMC Engineers’ training and training records.
- Reviewing EMC test reports and test plans.
- Reviewing and/or writing EMC test procedures.
- Maintaining Calibration records and intervals of EMC test equipment and systems.
- Complying with all aspects of F2 Labs Quality Manual, Policies, and Procedures.
- Providing consulting services to clients with EMC testing and design needs.
- Researching updates to testing standards and communicating the changes to other staff.
- Communicating project status with management and providing ongoing support to clients as needed.
- Working closely with Management on continuous improvement of EMC operations.
- Performing other work as required.
Qualifications: The ideal candidate will have the following qualifications:
- A Bachelor of Engineering or higher in Electronic Engineering, (or a similar subject), w/ minimum of 2-4 years EMC Laboratory Management experience.
- Two or more years of engineering experience.
- Strong communications skills and the ability to work with customers and as a team.
- Strong computer skills and familiarity with common applications (Word, Excel, etc.).
- A valid driver’s license.
- Experience with RF.
- Ability to travel occasionally as needed.
Location: Middlefield, OH
Compensation: Negotiable depending on the level of experience
Additional Benefits of Working at F2 Labs:
- Opportunity for advancement.
- Health insurance (F2 Labs pays 50% of the premium and 50% of the deductible).
- Option to purchase dental insurance (F2 Labs pays 50% of premium).
- 10-15 paid holidays per year.
- 10 days of vacation per year (accrued; rolls over year to year, capped at 20 days)
- 5 sick/personal days per year.
- 401K plan is available after 1 year.
- Possibility of participation in a profit-sharing plan.
- Option to purchase supplemental short/long term disability.
- Option to purchase supplemental life insurance and legal shield insurance.
Senior EMC Engineer
Middlefield, OH
F2 Labs is seeking a Senior EMC Engineer to join our EMC testing team in Middlefield, OH!
Responsibilities: Senior EMC Project Engineers’ responsibilities include, but are not limited to:
- Performing EMC testing of products in the laboratory and at client premises, in accordance with applicable standards and test plans, and performing other tests as assigned.
- Taking responsibility for complex projects, requiring the engineer to:
- Read and determine the applicability of international and national standards clauses for the EUT (equipment under test).
- Validate the project scope and the applicability to the EUT.
- Review established test plan for accuracy as well as co-write a test plan as needed.
- Set up and operate EUT; perform and document simple modifications as needed.
- Providing consulting services to clients with EMC testing and design needs.
- Train and mentor less senior technical staff.
- Researching updates to testing standards and communicating the changes to other staff.
- Communicating project status and test results to the client, sales personnel, and management throughout testing and providing on-going support to clients as needed.
- Within policy guidelines, identifying, properly documenting, and recommending engineering judgments.
- Working closely with Management on continuous improvement of EMC operations.
- Performing other work as required.
Qualifications: The ideal candidate will have the following qualifications:
- A Bachelor of Engineering or higher in Electronic Engineering, (or a similar subject), w/ minimum of 1-4 years EMC testing experience or an Associate Degree in Electrical/Electronic Engineering with a minimum of 2 years EMC testing experience.
- Two or more years of engineering experience.
- Strong communications skills and the ability to work with customers and as a team.
- Strong computer skills and familiarity with common applications (Word, Excel, etc.).
- A valid driver’s license.
- Some experience with/interest in RF would be beneficial.
- Ability to travel to client sites as needed.
Location: Middlefield, OH
Compensation: Negotiable depending on the level of experience
Additional Benefits of Working at F2 Labs:
- Opportunity for advancement.
- Health insurance (F2 Labs pays 50% of the premium and 50% of the deductible).
- Option to purchase dental insurance (F2 Labs pays 50% of premium).
- 10-15 paid holidays per year.
- 10 days of vacation per year (accrued; rolls over year to year, capped at 20 days)
- 5 sick/personal days per year.
- 401K plan is available after 1 year.
- Possibility of participation in a profit-sharing plan.
- Option to purchase supplemental short/long term disability.
- Option to purchase supplemental life insurance and legal shield insurance.
EMC Engineer
Middlefield, OH
F2 Labs is seeking an EMC Engineer to join our EMC testing team in Middlefield, OH!
Responsibilities: EMC Engineers’ responsibilities include, but are not limited to:
- Performing EMC testing in the laboratory and at client premises, and performing other tests as assigned.
- Reading and determining the applicability of National and International standards.
- Validating the project scope and sample applicability.
- Following established test plan.
- Setting up and operating standard test equipment including but not limited to the spectrum analyzer, oscilloscope, multi-meter, surge generator, amplifiers, receivers.
- Communicating project status and test results to the client, sales personnel, and management throughout testing.
- Providing on-going support to clients as needed.
- Within policy guidelines, identifying, properly documenting, and recommending engineering judgments.
- Working closely with Management on continuous improvement of EMC operations.
- Performing other work as required.
Qualifications: The ideal candidate will have the following qualifications:
- An Associate Degree or higher in Electrical Engineering, (or similar) or have 2+ years prior EMC Technician experience w/ EMC testing.
- Prior EMC testing experience and knowledge of the EMC standards preferred.
- 2+ years of engineering experience.
- Strong communications skills and the ability to work with customers and as a team.
- Strong computer skills and familiarity with common applications (Word, Excel, etc.).
- A valid driver’s license.
- Some experience with/interest in RF would be beneficial.
- Ability to travel to client sites as needed.
Location: Middlefield, OH
Compensation: Negotiable depending on the level of experience
Additional Benefits of Working at F2 Labs:
- Opportunity for advancement
- Health insurance (F2 Labs pays 50% of the premium and 50% of the deductible)
- Option to purchase dental insurance (F2 Labs pays 50% of premium)
- 10-15 paid holidays per year
- 10 days of vacation per year (accrued; rolls over year to year, capped at 20 days)
- 5 sick/personal days per year
- 401K plan is available after 1 year
- Possibility of participation in a profit-sharing plan
- Option to purchase supplemental short/long term disability
- Option to purchase supplemental life insurance and legal shield insurance
Product Safety Engineer
Middlefield, OH
F2 Labs is seeking both Senior and Junior Safety Engineers to join our safety testing team
Responsibilities: Product Safety Engineer’s responsibilities include, but are not limited to:
- Performing testing and evaluation on various products to the provisions of U.S., Canadian, and other International product performance standards.
- Under the guidance of a senior engineer, conducting on and off-site evaluations of products to determine compliance with the applicable standard(s). To do this, Engineer must:
- Read and determine the applicability of national codes and standards clauses for the EUT (equipment under test);
- Read and understand schematics and manufacturing instructions;
- Validate the project scope and sample applicability;
- Under the scope of the project, identify and locate test instruments and equipment required for testing;
- Follow established test plan; Set up and operate EUT; perform and document simple repairs on EUT as needed;
- Conduct thorough construction review; document results;
- Perform testing of products in accordance with standards.
- Writing reports, and communicating with clients.
- Independently, conducting on and off-site evaluations of products to determine compliance with the applicable standard(s).
- Communicating project status and test results to clients, sales personnel, and management throughout testing.
- Providing ongoing support to clients as needed.
Qualifications: The ideal candidate will have the following qualifications:
- Bachelor’s degree in engineering (preferably electrical or mechanical engineering) and/or Associate or Technical degree or Technologist (BSc, B.Eng or CET) in an appropriate technical field
- 0-4 years related experience/experience with U.S., Canadian, and other International product safety standards, i.e., ANSI, CSA, UL, EN, IEC, IES, CIE
- Excellent communication skills, in both verbal and written formats
- Excellent organization and time management skills
- Excellent interpersonal skills
- Must be self-motivated and able to work independently in a fast-paced, multi-tasking environment
- Microsoft Office expertise
- Ability to travel as business needs dictate
Location: Indianapolis, IN
Compensation: $55,000 to $110,000 Yearly
Additional Benefits of Working at F2 Labs:
- Opportunity for advancement.
- Health insurance (F2 Labs pays 50% of the premium and 50% of the deductible).
- Option to purchase dental insurance (F2 Labs pays 50% of the premium).
- 10-15 paid holidays per year.
- 10 days of vacation per year (accrued; rolls over year to year, capped at 20 days)
- 5 sick/personal days per year.
- 401K plan is available after 1 year.
- Possibility of participation in a profit-sharing plan.
- Option to purchase supplemental short/long term disability.
- Option to purchase supplemental life insurance and legal shield insurance.
Senior Compliance Engineer – Product Safety
Damascus, MD
F2 Labs is seeking both Senior and Junior Safety Engineers to join our safety testing team!
Responsibilities: Senior Compliance Engineer’s responsibilities include, but are not limited to:
- Performing testing and evaluation on a variety of products to the provisions of U.S., Canadian, and other international product performance standards.
• Under the guidance of a senior engineer, conducting on and off-site evaluations of products to determine compliance with the applicable standard(s). To do this, Engineer must:- Read and determine the applicability of national codes and standards clauses for the EUT (equipment under test);
- Read and understand schematics and manufacturing instructions;
- Validate the project scope and sample applicability;
- Under the scope of the project, identify and locate test instruments and equipment required for testing;
- Follow established test plan; Set up and operate EUT; perform and document simple repairs on EUT as needed;
- Conduct thorough construction review; document results;
- Perform testing of products in accordance with standards.
- Writing reports, and communicating with clients.
- Independently, conducting on and off-site evaluations of products to determine compliance with the applicable standard(s).
- Communicating project status and test results to clients, sales personnel, and management throughout testing.
- Providing ongoing support to clients as needed.
Qualifications: The ideal candidate will have the following qualifications:
- Bachelor’s degree in engineering (preferably electrical or mechanical engineering) and/or Associate or Technical degree or Technologist (BSc, B.Eng, or CET) in an appropriate technical field.
- 0-4 years related experience/experience with U.S., Canadian, and other International product safety standards, i.e., ANSI, CSA, UL, EN, IEC, IES, CIE, etc.
- Excellent communication skills, in both verbal and written formats.
- Excellent organization and time management skills.
- Excellent interpersonal skills.
- Must be self-motivated and able to work independently in a fast-paced, multi-tasking environment.
- Microsoft Office expertise.
- Ability to travel as business needs dictate
Location: Indianapolis, IN
Compensation:$70,000 to $110,000 Yearly
Additional Benefits of Working at F2 Labs:
- Opportunity for advancement.
- Health insurance (F2 Labs pays 50% of the premium and 50% of the deductible).
- Option to purchase dental insurance (F2 Labs pays 50% of premium).
- 10-15 paid holidays per year.
- 10 days of vacation per year (accrued; rolls over year to year, capped at 20 days)
- 5 sick/personal days per year.
- 401K plan is available after 1 year.
- Possibility of participation in a profit-sharing plan.
- Option to purchase supplemental short/long term disability.
- Option to purchase supplemental life insurance and legal shield insurance.
Senior Safety Engineer
Damascus, MD
F2 Labs is seeking both Senior and Junior Product Safety Engineers to join our safety testing team!
Responsibilities: Senior Compliance Engineer’s responsibilities include, but are not limited to:
- Performing testing and evaluation on various products to the provisions of U.S., Canadian, and other International product performance standards.
- Under the guidance of a senior engineer, conducting on and off-site evaluations of products to determine compliance with the applicable standard(s). To do this, Engineer must:
- Read and determine the applicability of national codes and standards clauses for the EUT (equipment under test);
- Read and understand schematics and manufacturing instructions;
- Validate the project scope and sample applicability;
- Under the scope of the project, identify and locate test instruments and equipment required for testing;
- Follow established test plan; Set up and operate EUT; perform and document simple repairs on EUT as needed;
- Conduct thorough construction review; document results;
- Perform testing of products in accordance with standards.
- Writing reports, and communicating with clients.
- Independently, conducting on and off-site evaluations of products to determine compliance with the applicable standard(s).
- Communicating project status and test results to clients, sales personnel, and management throughout testing.
- Providing ongoing support to clients as needed.
Qualifications: The ideal candidate will have the following qualifications:
- Bachelor’s degree in engineering (preferably electrical or mechanical engineering) and/or Associate or Technical degree or Technologist (BSc, B.Eng or CET) in an appropriate technical field
- 0-4 years related experience/experience with U.S., Canadian, and other International product safety standards, i.e., ANSI, CSA, UL, EN, IEC, IES, CIE
- Excellent communication skills, in both verbal and written formats
- Excellent organization and time management skills
- Excellent interpersonal skills
- Must be self-motivated and able to work independently in a fast-paced, multi-tasking environment
- Microsoft Office expertise
- Ability to travel as business needs dictate.
Location: Most likely Damascus, MD – the possibility of working out of our OH or IN facilities, depending on your level of experience.
Compensation: $70,000 to $110,000 Yearly
Additional Benefits of Working at F2 Labs:
- Opportunity for advancement.
- Health insurance (F2 Labs pays 50% of the premium and 50% of the deductible).
- Option to purchase dental insurance (F2 Labs pays 50% of the premium).
- 10-15 paid holidays per year.
- 10 days of vacation per year (accrued; rolls over year to year, capped at 20 days)
- 5 sick/personal days per year.
- 401K plan is available after 1 year.
- Possibility of participation in a profit-sharing plan.
- Option to purchase supplemental short/long term disability.
- Option to purchase supplemental life insurance and legal shield insurance.