Category Archives: CE marking

RoHS 2011/65/EU – New Restrictions July 2019

Posted on May 30, 2019 by Peter Jolles

RoHS 2011/65/EU presently requires compliance for electrical and electronic equipment to these six substances indicated in Annex II: We note that RoHS 2011/65/EU was amended by Commission Delegated Directive (EU) 2015/863 in March of 2015. The new restrictions are highlighted … Continue reading →

Posted in CE marking, Consulting, REACH, RoHS Directive 2011/65/EU | Tagged , , , , | Comments Off on RoHS 2011/65/EU – New Restrictions July 2019

EN 62368-1:2014 will replace EN 60950-1 and EN 60065

Posted on May 8, 2019 by Peter Jolles

EN 62368-1:2014 will replace two main EN standards on December 20, 2020. A year or two years ago this seemed a long way off. Now it is right around the corner. To begin with, we want to take a look … Continue reading →

Posted in CE marking, Low Voltage Directive 2014/35/EU, Radio Equipment Directive 2014/53/EU | Tagged , , , , , , , , , | Comments Off on EN 62368-1:2014 will replace EN 60950-1 and EN 60065

Changes to the Machinery Directive 2006/42/EC

Posted on March 25, 2019 by Peter Jolles

Some pretty drastic changes to the Machinery Directive 2006/42/EC were published on the European Commission’s Machinery Directive page on March 18, 2019. Most noticeably, prior to March 18, all of the harmonized standards attached to the Machinery Directive and published … Continue reading →

Posted in CE marking, Machinery Directive 2006/42/EC | Comments Off on Changes to the Machinery Directive 2006/42/EC

New RoHS standard – EN 63000:2018

Posted on March 22, 2019 by Peter Jolles

CENELEC has published a new RoHS standard, announcing it, here. The new standard is EN ISO 63000:2018 Technical Documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances. The referenced CENELEC article indicates … Continue reading →

Posted in CE marking, Consulting, RoHS Directive 2011/65/EU | Tagged , , , , , , , , | Comments Off on New RoHS standard – EN 63000:2018

What is the Critical Component List?

Posted on January 18, 2019 by Peter Jolles

F2 Labs performs safety evaluations & testing, EMC testing, and consulting for various compliance related issues faced by our customers. We open safety evaluations at F2 Labs by sending a list of information we need in order to review the … Continue reading →

Posted in CE marking, Consulting, EN 60601-1, General Product Safety Directive 2001/95/EC, Listing, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Medical Devices Regulation (EU)2017/745, Product Testing, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU, UL 60335-1, UL 61010-1, UL 62368-1 | Comments Off on What is the Critical Component List?

RoHS 2011/65/EU and a Tale of Three Guitars

Posted on January 11, 2019 by Peter Jolles

The world has many good guitar manufacturers but it is commonly accepted that the very best guitars are made in the United States. Few guitar players will dispute that. In the world of acoustic guitars there are three ‘big’ manufacturers … Continue reading →

Posted in CE marking, Consulting, Product Testing, REACH, RoHS Directive 2011/65/EU | Tagged , , | Comments Off on RoHS 2011/65/EU and a Tale of Three Guitars

Harmonized Standards and Why They Are Important

Posted on October 18, 2018 by Peter Jolles

The main electrical safety standard for machinery, EN 60204-1, was revised by CENELEC and published on September 14, 2018. The currently harmonized version, EN 60204-1:2006+A1:2009, is still the officially recognized version. What does this mean? As a primer, I suggest … Continue reading →

Posted in CE marking, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC | Tagged , , , , | Comments Off on Harmonized Standards and Why They Are Important

The Machinery Directive 2006/42/EC and Interchangeable Equipment

Posted on September 18, 2018 by Peter Jolles

As usual, I opened the RAPEX Weekly Report that delivers to my inbox every Friday morning. Scrolling through, I reviewed three cases involving saw blades. These are interesting because they were stopped for violating the Machinery Directive 2006/42/EC. Normally when … Continue reading →

Posted in CE marking, Consulting, Machinery Directive 2006/42/EC, Product Testing | Tagged , , , , | Comments Off on The Machinery Directive 2006/42/EC and Interchangeable Equipment

The Machinery Directive 2006/42/EC and Notified Bodies

Posted on June 4, 2018 by Peter Jolles

What is a Notified Body and what does it have to do with the Machinery Directive 2006/42/EC? In most cases presented to us, absolutely nothing. I wanted to write this article because we are asked, from time to time, if … Continue reading →

Posted in CE marking, Consulting, Machinery Directive 2006/42/EC, Product Testing | Tagged , , , | Comments Off on The Machinery Directive 2006/42/EC and Notified Bodies

The Ambiguity of the CE Marking Process

Posted on June 1, 2018 by Peter Jolles

Yesterday I posted an article pertaining to last week’s RAPEX report and the scope of the Low Voltage Directive 2014/35/EU. Today I reviewed this week’s ‘catch’ of non-conforming products and it is a very illustrative of the opaqueness, sometimes, of … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, General Product Safety Directive 2001/95/EC, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU | Comments Off on The Ambiguity of the CE Marking Process