Tag Archives: RoHS

RoHS 3 and the new (EU)2015/863 Substances

Posted on October 3, 2019 by Peter Jolles

Now that we have been under the ‘new’ EU RoHS for a few months I thought it would be a good time to write a brief article to cover some of the most commonly asked questions. What changed? RoHS 2011/65/EU … Continue reading →

Posted in CE marking, RoHS Directive 2011/65/EU | Tagged , , , | Comments Off on RoHS 3 and the new (EU)2015/863 Substances

RoHS 2011/65/EU – New Restrictions July 2019

Posted on May 30, 2019 by Peter Jolles

RoHS 2011/65/EU presently requires compliance for electrical and electronic equipment to these six substances indicated in Annex II: We note that RoHS 2011/65/EU was amended by Commission Delegated Directive (EU) 2015/863 in March of 2015. The new restrictions are highlighted … Continue reading →

Posted in CE marking, Consulting, REACH, RoHS Directive 2011/65/EU | Tagged , , , , | Comments Off on RoHS 2011/65/EU – New Restrictions July 2019

New RoHS standard – EN 63000:2018

Posted on March 22, 2019 by Peter Jolles

CENELEC has published a new RoHS standard, announcing it, here. The new standard is EN ISO 63000:2018 Technical Documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances. The referenced CENELEC article indicates … Continue reading →

Posted in CE marking, Consulting, RoHS Directive 2011/65/EU | Tagged , , , , , , , , | Comments Off on New RoHS standard – EN 63000:2018

REACH Regulation (EC) No 1907/2006 – Article 7, Annex VII, and practical considerations for manufacturers – the CRASH COURSE

Posted on May 3, 2018 by Peter Jolles

One possible cause for an audible “gulp” coming from the reader of a specifications sheet is coming across a requirement to comply, vaguely, with the REACH Regulation (EC) 1907/2006. Broadly, REACH is meant to ensure that products in Europe do … Continue reading →

Posted in Consulting, Product Testing, REACH, RoHS Directive 2011/65/EU | Tagged , , , , , , , , , , | Comments Off on REACH Regulation (EC) No 1907/2006 – Article 7, Annex VII, and practical considerations for manufacturers – the CRASH COURSE

Spare Parts and the RoHS Directive

Posted on February 19, 2018 by Peter Jolles

The RoHS Directive 2011/65/EU was amended in November 2017 by Directive (EU) 2017/2102 with some administrative clarifications. I found one item particularly interesting: Recital (2): (2) Secondary market operations for EEE, which involve repair, replacement of spare parts, refurbishment and … Continue reading →

Posted in CE marking, RoHS Directive 2011/65/EU | Tagged , , , , , , , , , , , | Comments Off on Spare Parts and the RoHS Directive

RoHS 2011/65/EU and Machinery

Posted on February 5, 2018 by Peter Jolles

F2 Labs assists many manufacturers, internationally, with CE marking requirements. Regarding CE marking, primarily we test and evaluate electro-mechanical equipment for compliance with electrical safety, machinery safety, EMC and radio, medical device, and hazardous location requirements. However, when a manufacturer … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EMC Directive 2014/30/EU, General Product Safety Directive 2001/95/EC, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Medical Devices Regulation (EU)2017/745, Product Testing, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Tagged , , , , , , , , , , | Comments Off on RoHS 2011/65/EU and Machinery

RoHS 2011/65/EU, EN 50581:2012, and clause 4.3.3.

Posted on November 20, 2017 by Peter Jolles

Manufacturers that send equipment to the EU with a CE marking must understand that a CE marking is a blanket claim by the manufacturer. The claim is that the equipment complies with any applicable CE marking Directive. This article is … Continue reading →

Posted in CE marking, RoHS Directive 2011/65/EU | Tagged , , , , , , , | Comments Off on RoHS 2011/65/EU, EN 50581:2012, and clause 4.3.3.

The Exemption for Medical Devices Under the RoHS Directive Has Expired

Posted on August 8, 2017 by Peter Jolles

The RoHS Directive 2011/65/EU, Article 4 (3) exclusion for industrial monitoring and control instruments expired on Saturday, July 22, 2017. That exclusion was used by quite a few manufacturers to delay RoHS compliance, but Article 4 (3) is now gone. … Continue reading →

Posted in CE marking, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, RoHS Directive 2011/65/EU | Tagged , , , , | Comments Off on The Exemption for Medical Devices Under the RoHS Directive Has Expired

CE marking and the Technical File

Posted on April 7, 2017 by Peter Jolles

Manufacturers who send equipment into the EU are required to send a CE compliant product in most cases. This means that if you are making an electromechanical device, chances are that you will need to comply with at least one, … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, General Product Safety Directive 2001/95/EC, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Product Testing, R&TTE Directive 1999/5/EC, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Tagged , , , , , , , , , , , , | Comments Off on CE marking and the Technical File

New RoHS restrictions, substances added to Annex II

Posted on November 28, 2016 by Peter Jolles

There is a change on the horizon for manufacturers used to complying with RoHS based on the restriction of the six substances indicated in RoHS 2011/65/EU (Annex II): Lead (0.1%) Mercury (0.1%) Cadmium (0.01%) Hexavalent chromium (0.1%) Polybrominated biphenyls (PBB) … Continue reading →

Posted in CE marking, RoHS Directive 2011/65/EU | Tagged , , , , , , , , , , | Comments Off on New RoHS restrictions, substances added to Annex II