Category Archives: Machinery Regulation (EU)2023/1230

Machinery Regulation (EU)2023/1230

Is Machinery in Scope of the RoHS Directive?

Posted on April 13, 2025 by Peter Jolles

“My machine is industrial machinery, do I have to comply with RoHS for CE marking?” We are frequently asked this question. The answer is – yes, unless you fall into one of the exclusions available from the RoHS Directive 2011/65/EU. … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EMC Directive 2014/30/EU, International Testing, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, Pressure Equipment Directive 2014/68/EU, Product Testing, Prop 65, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU | Comments Off on Is Machinery in Scope of the RoHS Directive?

CE Marking: Your Electronic Product’s Passport to Europe

Posted on February 5, 2025 by Keith Cooper

If electrical products had passports, the CE mark would be their golden ticket to travel freely across Europe. But unlike that dusty old passport you forgot to renew, CE marking isn’t just a stamp—it’s a declaration of compliance with essential … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, General Product Safety Regulation (EU) 2023/988, GPSR, GPSR (EU)2023/988, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU | Comments Off on CE Marking: Your Electronic Product’s Passport to Europe

Does Customs Really Check For RoHS in The EU?

Posted on January 10, 2025 by Peter Jolles

Yes. I get an email every week from the European Commission’s Safety Gate that lists some of the most dangerous products that were recently pulled from the market. These alerts are for products stopped in customs before they enter the … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Product Testing, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU | Comments Off on Does Customs Really Check For RoHS in The EU?

Navigating CE Certification for Entry Into the European Market

Posted on July 19, 2024 by Intero Digital

As both established and startup consumer electronics manufacturers look to expand their market reach, the European Union presents an enticing, lucrative growth opportunity. Entry into this market comes with its prerequisites, however, one of which is CE certification testing. This … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, Pressure Equipment Directive 2014/68/EU, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Comments Off on Navigating CE Certification for Entry Into the European Market

ESD and Electric Vehicles (EVs) – New Challenges

Posted on January 5, 2023 by Keith Cooper

Electric vehicle (EV) technology continues to evolve, grow, and become more commonplace. Changes and an increase in popularity will continue, especially with the insertion of ethernet technology for data communication in those systems. ESD protection is extremely important; especially in … Continue reading →

Posted in CE marking, EMC Directive 2014/30/EU, EMC Testing, EN 60601-1, FCC, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, Product Testing, Radio Equipment Directive 2014/53/EU | Comments Off on ESD and Electric Vehicles (EVs) – New Challenges

Enforcement of the UKCA Mark is Postponed

Posted on November 21, 2022 by Keith Cooper

On November 14, 2022 the UK announced that use of the UKCA Mark (for Great Britain) is to be postponed an additional two years until December 31, 2024.  Previously, mandatory use of the mark and scheme was supposed to be … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, Pressure Equipment Directive 2014/68/EU, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU, UKCA | Comments Off on Enforcement of the UKCA Mark is Postponed

The Machinery Directive is applicable to many Non-Electric Devices

Posted on May 13, 2022 by Peter Jolles

A lot of our efforts at F2 labs are spent determining the applicability of different regulations to our customers’ products. We help you find out what is applicable and then we suggest the best, fastest, and most cost-effective way to … Continue reading →

Posted in CE marking, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230 | Comments Off on The Machinery Directive is applicable to many Non-Electric Devices

What Now?

Posted on February 3, 2022 by Keith Cooper

A comprehensive guide into the listing standards that are required after testing to compliance marks. Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, FCC, FDA, Field Label, GPSR, GPSR (EU)2023/988, International Testing, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Prop 65, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU, SPE-1000, UKCA, US Field Label | Comments Off on What Now?

What is a CE marking? Does My Product Need One?

Posted on December 2, 2021 by Keith Cooper

The CE mark is a mandatory European marking for certain product groups to indicate conformity with the essential requirements set out in European Directives. To use the CE mark on a product, the manufacturer must draw up an EU Declaration of … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, EMC Testing, GPSR, GPSR (EU)2023/988, Lasers, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, Pressure Equipment Directive 2014/68/EU, Product Testing, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Comments Off on What is a CE marking? Does My Product Need One?

Great Britain Changed the UKCA Deadline for Implementation, Again

Posted on September 15, 2021 by F2 IT

The COVID-19 pandemic has thrown us all for a loop. Effects of the pandemic have been seen across many industries, supply chains, and more, including the extension of deadlines for product compliance regulations. In a statement on August 24th, 2021, … Continue reading →

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, EN 60601-1, General Product Safety Regulation (EU) 2023/988, GPSR, GPSR (EU)2023/988, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, Pressure Equipment Directive 2014/68/EU, Product Testing, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU | Tagged | Comments Off on Great Britain Changed the UKCA Deadline for Implementation, Again