Category Archives: Pressure Equipment Directive 2014/68/EU

Does Customs Really Check For RoHS in The EU?

Yes. I get an email every week from the European Commission’s Safety Gate that lists some of the most dangerous products that were recently pulled from the market. These alerts are for products stopped in customs before they enter the … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Product Testing, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU | Comments Off on Does Customs Really Check For RoHS in The EU?

Navigating CE Certification for Entry Into the European Market

As both established and startup consumer electronics manufacturers look to expand their market reach, the European Union presents an enticing, lucrative growth opportunity. Entry into this market comes with its prerequisites, however, one of which is CE certification. This certification … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, Pressure Equipment Directive 2014/68/EU, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Comments Off on Navigating CE Certification for Entry Into the European Market

On The Need For Translations

This is an often-asked question, “Do I need to translate the manual for the EU and what do I need to translate?” The answer is everything that is needed top assemble, safely operate, maintain, and eventually dispose of the equipment … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Pressure Equipment Directive 2014/68/EU, Radio Equipment Directive 2014/53/EU | Tagged , | Comments Off on On The Need For Translations

Important CE Marking Questions and Answers

Frequently at F2 Labs we get very deep into various topics regarding CE marking and other compliance requirements. I can only imagine the sinking feeling that a manufacturer must feel when seeing this on a request for bid: CE marking … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Medical Devices Regulation (EU)2017/745, Pressure Equipment Directive 2014/68/EU, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Comments Off on Important CE Marking Questions and Answers

The Ambiguity of the CE Marking Process

Yesterday I posted an article pertaining to last week’s RAPEX report and the scope of the Low Voltage Directive 2014/35/EU. Today I reviewed this week’s ‘catch’ of non-conforming products and it is a very illustrative of the opaqueness, sometimes, of … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, General Product Safety Directive 2001/95/EC, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Machinery Regulation (EU)2023/1230, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU | Comments Off on The Ambiguity of the CE Marking Process

CE marking Onsite Consulting and Training

F2 Labs is able to send a CE marking expert to your facility to provide overview training to your business – sales and engineering. We can quickly dig into the Directives that apply to your specific products and show your … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EN 60601-1, General Product Safety Directive 2001/95/EC, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, R&TTE Directive 1999/5/EC, Radio Equipment Directive 2014/53/EU, REACH, RoHS Directive 2011/65/EU | Tagged , , , , , | Comments Off on CE marking Onsite Consulting and Training

EU’s Rapid Alert System for dangerous non-food products

The EU has a direct conduit for market surveillance authorities to communicate information about non-compliant products directly between 31 EU member nations and the European Commission. This system is called the Rapid Alert System, or RAPEX. This is not where … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, Consulting, EMC Directive 2014/30/EU, EN 60601-1, General Product Safety Directive 2001/95/EC, IP Testing, Lasers, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Product Testing, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Tagged , , , , , , , , | Comments Off on EU’s Rapid Alert System for dangerous non-food products

The EU declaration of conformity

A frequent source of confusion for exporters of products to the EU is the EU declaration of conformity. Many customers that we assist are vaguely familiar with the concept and the role of the “DoC”. The EU declaration of conformity … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, EN 60601-1, General Product Safety Directive 2001/95/EC, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Product Testing, R&TTE Directive 1999/5/EC, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Tagged , , , , , , , , , , , , , , , | Comments Off on The EU declaration of conformity

CE marking and the Technical File

Manufacturers who send equipment into the EU are required to send a CE compliant product in most cases. This means that if you are making an electromechanical device, chances are that you will need to comply with at least one, … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, General Product Safety Directive 2001/95/EC, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Product Testing, R&TTE Directive 1999/5/EC, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Tagged , , , , , , , , , , , , | Comments Off on CE marking and the Technical File

Primer For CE and other European Compliance Markings

Manufacturers who build equipment for sale to customers in the European Union may spend a lot of time learning about and understanding the process that is required in order to sell their products with a CE marking on it. Placing … Continue reading

Posted in ATEX Directive 2014/34/EU, CE marking, EMC Directive 2014/30/EU, General Product Safety Directive 2001/95/EC, Low Voltage Directive 2014/35/EU, Machinery Directive 2006/42/EC, Medical Devices Regulation (EU)2017/745, PPE Regulation (EU) 2016/425, Pressure Equipment Directive 2014/68/EU, Product Testing, R&TTE Directive 1999/5/EC, Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU | Comments Off on Primer For CE and other European Compliance Markings